error 991b
ελληνική μουσική
Η Ελληνική Μουσική Κοινότητα από το 1997

ibanez v74 ece το κουρδιστιρι δουλευει μονο οταν ειναι πανω το καλωδιο

alexguitarist
23.08.2013, 19:53

Εχωντας στα χερια μου την Ibanez v74 ece αλλαζοντας την με καινουργια μπαταρια (ειχε ηδη αλλα λογικα θα ειχε αδιασει ) παταω το κουμπι για το κουρδιστηρι και δεν αναβε .χρειαζεται να κανω κατι για να δουλεψει;

ευχαριστω

λοιπον συνδεσα το καλωδιο που διαβαζει τη δονηση (του κουρδιστηριου) και αναψε δουλευε κανονικα γιατι χωρις το καλωδιο δεν δουλευει;

[ τροποποιήθηκε από τον/την alexguitarist, 23-08-2013 20:20 ]

[ τροποποιήθηκε από τον/την alexguitarist, 23-08-2013 20:23 ]


delta66
24.08.2013, 14:15

Πρεπει η κιθαρα να εχει καποιον απο τους προενισχυτες (AEQ200T, AEQ200MT, AEQ202T)

Tuner functions
TUNER ON/OFF SWITCH
(SST, SRTn, SRTc, SPT, SPTII, Ibanez Onboard Tuner)
Power is turned on or off by each press of this switch.The tuner will turn off automatically after 5 minutes. (You can turn this on even if acable is not connected.)
(AEQ210T)
Pressing this button will alternately turn the tuning meter ON/OFF.
The tuning meter will not turn off automatically, so when you have
finished tuning, you should press the "TUNER" switch once again to
turn off the tuner. (You can turn this on even if a cable is not connected.)
( AEQ200T, AEQ200MT, AEQ202T)
Pressing this button will alternately turn the tuning meter on/off. It can
be turned on only if a guitar cable is plugged into the guitar jack. The
tuning meter will not turn off automatically, so when you've finished
tuning, you should press the "TUNER" switch once again to turn off
the tuner.
While the tuner is operating, the output will be muted; no sound will be
produced from the guitar's output jack.
A protection circuit will operate immediately after the power is turned
on, so the tuner may not respond to a softly played note. Play the first
note aggressively in order to activate the tuner.
http://www.Ibanez.co.jp/world/manual/guitars/AG_2010.pdf


alexguitarist
24.08.2013, 22:31
οκ